logo used in elementor header

Roof guard 107 waterproofing solution specifically designed for sandwich panel roofs

Additional information





180.00 AED

Share this


Roof Guard 107 waterproofing for sandwich panel  is a specially formulated acrylic resin based elastomeric roof waterproof compound which has an outstanding durability, UV resistant, resistance to weathering and very high degree of flexibility. Elastomeric Acrylic Waterproof Coating

Product Use: This product is used for various surface protection and waterproofing applications. It can be applied to different types of surfaces such as asbestos, metal roofs, and concrete roofs.

Advantages of the Product:

  1. Excellent UV resistance: The product can withstand exposure to ultraviolet (UV) radiation without degrading.
  2. Complete protection for roofs: It offers comprehensive protection for the surfaces it’s applied to.
  3. Excellent anti-fungal properties: It helps prevent the growth of fungi on the treated surfaces.
  4. Completely waterproof and weatherproof: The product ensures that the surface is fully protected from water and all weather conditions.
  5. Specially formulated for extreme climatic conditions: It is designed to perform well in harsh weather conditions.
  6. Higher polymer content, never leads to corrosion for metal roofing: This feature is especially beneficial for metal roofs, as it prevents corrosion.
  7. Recommended for use as a protective membrane for P.U. (polyurethane) installation.
  8. Ideal for waterproofing car park decks and exposed surfaces in water-prone systems.

Surface Preparation: Before applying the product, the surface must be prepared properly. It should be clean and free of dust, dirt, oil, grease, and loose particles. For metal surfaces, it’s essential to remove rust and contamination for the best results.

Application Instructions: The product can be applied using various methods, such as a brush, roller, or an appropriate spray system. Be sure to follow the recommended application instructions to achieve the desired results


  • The product provides coverage at a rate of approximately 0.6 kg/m2 per coat, depending on the surfaces and the means of application.


  • The product is non-toxic.
  • It is essential to ensure each coat has completely cured (at least 8 hours at 30°C) before applying the next coat.
  • For better results, it’s recommended to reinforce the first coat with a polyforce waterproof mesh at expansion areas and joints with parapets. Reinforcement is also recommended on joints and lap areas.


  • Apply a primer coat of RoofGuard 107 Acrylic Waterproof with a brush, roller, or spray. Once the primer coat has completely dried, apply a minimum of two coats of undiluted RoofGuard 107.


  • Density: 1.25
  • pH: 8 – 8.5
  • Solid content: 66 ± 2% by weight
  • Elongation at break: >300%
  • Color: White/Grey
  • UV resistance: Excellent
  • Resistance to acids, alcohol, petrol, diesel, saline, and non-saline solutions. It also has excellent resistance to weathering and UV exposure.


  • Available in 20 Kg Pails and 107 Kg Drums.

Shelf Life:

  • The product has a shelf life of 12 months in unopened original packaging.
  • Store the product between 5°C and 35°C.
  • Store under cover, out of direct sunlight, and protect it from extreme temperatures. In hot conditions, it must be stored in a temperature-controlled environment, i.e., at a temperature less than 30°C.

Tools Cleaning:

  • Clean all the tools with water after use.


  • The product is resistant to various substances, as mentioned earlier.


  • Meets British Standards-8102.


  • Store between 5°C and 35°C.

Surface Types:

  • The product can be applied to metal roofs, concrete roofs, and existing roof areas.


Additional information






There are no reviews yet.

Be the first to review “Roof guard 107 waterproofing solution specifically designed for sandwich panel roofs”

Your email address will not be published. Required fields are marked *

Open chat
Hello 👋
Can we help you?