logo used in elementor header

Proudi 2 ca two component waterproofing for durable water resistance

Packaging & Storage
Proudi 2CA is supplied in 20 kg units (15 Kg Powder (Part A) and 5 Kg Liquid (Part B) and it has a minimum shelf life of 12 months provided it is stored under cover

Additional information




15KG + 5Ltr, 20Kg + 10Ltr


Dream Home

80.00 AED125.00 AED

Share this


Proudi 2CA Two Component
Elastomeric Cementitious Acrylic Waterproofing


Proudi Two Component Elastomeric Cementitious Acrylic Waterproofing

2. Product Description
Proudi 2CA is a two component acrylic polymer modified elastomeric waterproofing membrane which consists of proudi 2CA powder and Bond acrylic emulsion. It also shows the Capillary waterproofing Characterises. proudi 2CA can simply be applied by a stiff brush, or trowel to obtain the desired thickness. proudi 2CA powder consists of specially selected cements, graded hard-wearing aggregates and additives supplied in powder and Proudi Bond Acrylic liquid component of blended acrylic copolymers. The polymer provides proudi 2CA with exceptional adhesion, toughness and durability.

3. Uses
Proudi 2CA effectively protects against concrete decay providing a long-lasting barrier to waterborne corrosive salts and atmospheric gases.
Swimming pool Waterproofing
Wet area waterproofing such as kitchen, Bathrooms, Pantry, Bathtub etc,
It can be used for waterproofing of roof areas.
Used as a waterproof coating for water tanks and reservoirs.
Used as a flexible coating to bridge shrinkage cracks. Uses as Waterproof & All Weatherproof Coating.
Excellent barrier to carbon dioxide, chloride and sulphate ions.
4. Typical Applications & Advantages
Waterproof suitable for water retaining structures.
Provides Seamless coating As a waterproof coating for roofs.
Impervious lining for water retaining structures.
Protection of concrete from seawater ingress.
Coating to prevent chloride ion ingress & carbonation attack.
Excellent adhesion.
Bonds to porous and non-porous surfaces.
Non-toxic and therefore suitable for contact with potable water. Ø UV Resistance
5. Typical Properties
Applicable Standard

SCAQMD Rule 1113

LEED NC2009 IEQ 4.2

Classified under BS EN 1062-1:2002 as Class C1

carbon dioxide permeability.BS 6920

Test Results
Bond Strength (full cure) 7.5 N/mm²
VOC < 5 g/L
Appearance Grey & Off White
Chloride Iron Permeability Reduction 98%
Application Temperature 10ºc- 40ºc
Toxicity Non Toxic
Tensile Strength (ASTM D 628 ) 2.1MPA(1.5mm Thickness)
Compressive Strength 32 N/mm²
6. Working Properties
Initial Drying 12 Hrs.
water Test After 24-48 Hrs.
7. Instructions for Use
Surface Preparation

The substrate must be structurally sound. Loose or unsound concrete should be removed and made good. Surfaces must be entirely free of oil, grease, paint, corrosion deposits, dust, laitance or other surface deposits. The surface should be prepared by light grit blasting or high-pressure water blasting to produce a lightly exposed aggregate surface. Any bug holes should be filled with Proudi 2CA, mixed using a small amount of the filler component and the liquid polymer component, to produce a paste that can easily be

applied using the ‘scrape on, scrape off’ technique with a steel scraper or steel trowel.

The surface should be primed using water to achieve a saturated surface dry (SSD) surface prior to application of Proudi 2CA.

Proudi 2CA is supplied as a two component pack consisting of filler and liquid polymer. Both components are pre-measured and no addition of water is necessary. Place the liquid polymer component into a suitable container and slowly add the filler component while mixing with a slow speed drill fitted with an approved mixing paddle. Mix for approximately 3 minutes until a lump-free creamy consistency is achieved. Mix only sufficient material for application within 45 minutes. Application Apply using brush, roller or hopper spray. First coat should be applied at 1 liter per m²; subsequent coats at 0.5 to 1.0 liter per m². Apply subsequent coats once the coat beneath has dried.

Do not add water to the material.
Do not apply to substrates that have free water on them.
Not suitable for use with acids.
Do not apply below 5C. Avoid excessive application. Avoid skin contact.
9. Coverage
Approximately 1.5 kg/m2 @ 2 mm thickness for two coats. coverage depends up on the porosity of substrate.

8. Packaging & Storage
Proudi 2CA is supplied in 20 kg units (15 Kg Powder (Part A) and 5 Kg Liquid (Part B) and it has a minimum shelf life of 12 months provided it is stored under cover, out of direct sunlight.

9. Health & Safety Precautions
Proudi 2CA is non-toxic but it is alkaline in nature. Gloves and goggles should be worn. Any splashes to the skin or eyes should be washed off with clean water. In the event of prolonged irritation, medical advice should be sought. Should use a dust mask while handing the powder.


Proudi 2CA components are non-flammable

Shelf Life
Factory sealed containers of this product are guaranteed to be of first quality for one (1) year if stored off the ground in a dry area.

Flood Test: After 24-48 Hrs. of application.

Head quarters
Tareeq Al Raha bldg. mat tr llc

Sajaa Industrial Area,

Sharjah, UAE

Mail: info@tareeqalraha.com


Export Department
Proudi Trading (fzc)

Sajaa Industrial Area

Sharjah, UAE

Web: www.proudi.ae

Mail: info@proudi.ae


Additional information




15KG + 5Ltr, 20Kg + 10Ltr


Dream Home


There are no reviews yet.

Be the first to review “Proudi 2 ca two component waterproofing for durable water resistance”

Your email address will not be published. Required fields are marked *

Open chat
Hello 👋
Can we help you?